Technical drawing of a Magnum Silhouette AR500 3/8" target plate: 10" wide, 13.25" tall, rounded bottom corners with a top notch, central .515" bolt hole located about 3.75" from the top, and a weight of 12.1 lbs.

Magnum Silhouette

$73.95

PLATE ONLY

AR500 Steel target plate for handgun and rifle

Out of stock

Email when stock available

Category:

Description

Magnum Silhouette  AR500 Steel Target

  • Available in 3/8″ AR500 only
  • Works best with our STANDARD HANGER.
  • Chain mount for maximum reactivity
  • Bolt mount for less side to side movement and increased target angle
  • Great for rifle or pistol.

Plate only, no hardware included.

  • BUY RECOMMENDED HANGERS: STANDARD HANGER –  For these large plates we recommend the STANDARD HANGER w / chain or bolt mount.
    •   The chain mount allows the plate to hang at approx 10 degrees downward angle and is reactive in all directions.
    •   The bolt mount limits side movement and longer bolts increase downward angle.

Standard Hanger info

⚙️ Hanger Versatility & Specs

Our most adaptable mounting solution, engineered to maximize target performance and safety.

  • Universal Fit: Mounts instantly to all standard forged T-posts.
  • Heavy Duty: Fabricated from heavy-duty 1/4″ A36 steel.
  • Weight Capacity: Safely holds target plates weighing over 100 lbs.
  • Downward Angle: Mounts plates at a 5-to-20-degree downward angle to direct bullet splatter safely into the ground.
  • Post Protection: Offsets the plate away from the T-post to prevent deflection damage to the post itself.
  • Stackable Design: Allows you to mount multiple target plates on a single T-post.
  • Built-in Tools: Features integrated wrenches right on the hanger body for fast bolt and clamp adjustments.

⛓️ Chain Mount Option

The ultimate setup for maximum target movement, visual feedback, and clear acoustic ring.

  • High Reactivity: Swings dynamically in all directions and resets fully in under 3 seconds.
  • Maximum Harmonics: Leaves the plate completely free to vibrate, producing a loud, distinct audio confirmation note.
  • Size Restriction: Optimized exclusively for our 10-inch target plates and larger.

🔩 Bolt Mount Option

The ideal mounting configuration for rapid-fire training.

  • Controlled Movement: Swings cleanly front-to-back while strictly limiting side-to-side wobble.
  • Target Sizes: Designed for top-hole plates weighing over 10 lbs.
  • Adjustable Angle: Changing your mounting bolt length lets you manually fine-tune the plate angle when using Hang Fast Plates.

🔒 T-Post Beam Clamp

A critical stabilization utility included to lock your range layout configuration firmly into place.

  • Anti-Slip Security: Keeps the hanger from sliding or walking down the T-post when plates under 10 lbs are subjected to heavy impacts.
  • Handling Insurance: Locks the hanger securely on the steel post so it won’t wobble or fall while you are mounting heavy plates.
  • Repeatable Spacing: Fixes exact height locations on the post, which is required for multi-post setups like our Tire Target System.

⚠️ Using Your Own Non-Hang Fast Plates?

Our system shields hardware from impact damage by hiding the hanger completely behind the steel plate. If you are not using Hang Fast plates, you must strictly follow these measurements:

  • Hole Placement (Chain): Your plate’s bolt hole MUST be drilled at least 3¾” down from the top edge, or the chain and hanger will be exposed to front impact.
  • Hole Placement (Bolt): For plates 12” and larger, drill the bolt hole exactly 1/3 of the total plate height down from the top edge to achieve a perfect 15-degree hanging angle. (Example: 4″ down on a 12″ plate; 6″ down on an 18″ plate).
  • Minimum Size: Do not use the chain combo on plates smaller than 10 inches; use our Fail Safe Hanger instead.
  • Hardware Warning: If your third-party plate holes are drilled too high, you must use a single 1 ½- 2” x ½” grade 8 carriage bolt mount, no chain. Thread the nut onto the bolt enough to engage locking threads, place the bolt into the slot on the Standard Hanger.   The plate must hang freely.   (see below)

     

     

             

          

Grade 8 Bolt info

Standard hardware store bolts cannot handle the violent shockwaves of high-energy rifle rounds. We use Grade 8 carriage bolts to keep your targets standing.
  • 150,000 PSI Tensile Strength: More than double the strength of standard 60,000 PSI hardware store bolts.
  • Prevents Shearing: Standard bolts fail in as few as 20 rounds from a 7.62×39 rifle because the intense plate vibration shears the heads right off. Grade 8 hardware resists this kinetic torque.
  • Safer Shooting: The smooth, low-profile carriage heads minimize dangerous bullet splatter deflection.
  • Easy Setup: The square neck locks directly into our square-hole plates. You only need one wrench for target assembly.
  • Hard to Find Local: Grade 8 hardware is highly specialized. We strongly recommend adding them to your order so you don’t get stranded at the range.

                            SHOP GRADE 8 BOLTS

T Post info

T Posts are manufactured from recycled railroad steel and are available in a variety of weights 0.95lbs, 1.25 lbs. & 1.33lbs, etc. per foot. The post is designed in a “T” configuration, has studs every 2-1/2 inches to help support the fence, and includes a 7 in. long by 3 in. wide steel anchor plate to stabilize the post in the ground.  Our T Post hangers are designed for 1.25 and 1.33 lb / ft T Posts.

  • Manufactured from rail steel
  • Weight 1.25 lbs. per lin. ft., including the anchor plate (most common)
  • Coated with rust-resistant green enamel paint for corrosion protection
  • Should be driven into the ground a minimum of 12 in.
  • Use Fence Post Driver or sledge hammer to drive post into the ground.
  • Using a sledge hammer can deform the post making hanger installation difficult.
  • Available at most farm and hardware stores.   Home Depot and Lowes.

TIPS:

  • Inspect the top of posts for deformation before purchasing.  During manufacturing they are cut to length while hot and the ends can become deformed making installing the hanger difficult.  Some deformation is normal, look for twisted or very obvious deformations.
  • When installing for temporary use or light target loads in firm ground, pound the post deep enough to engage the fin at least halfway.   This will make removing the post easier.
  • Make life easier and get a T Post pounder.
  • Make life even easier and get a T Post puller.   For hard ground or deep posts, this tool is a lifesaver.
  • BUY LOCALLY!  T post are available everywhere and cost more to ship than they are worth.

You may also like…